Category Archives: DIY
fry basket pendant light
Its about time I shared the other pendant light I told you about. I really did mean to post this sooner but you know what plans are like.
So… this is the newly enclosed end of the porch with its plain little light and unfinished walls. Pretty boring.
This is what it looks like now. Still unfinished but so much more interesting.
First I got the biggest of the fry baskets I had waiting to be made into something. Its a great size for a nice big pendant light. Using my trusty grinder I cut off the handle. I then cut out a section on the bottom to fit the light through. These light extension things are ready to use ones I bought from a hardware store years ago and had in the shed. This one is longer than the one I used on the entry light.
Next I moved the position of the light fitting. I was really limited in that cause I could only move it as far as the wire would allow me. Then I could only hang the light fitting as far towards the centre of the space as the cord on the light extension would allow me.
I love the way that looks. The rust in the basket gives the light an almost golden glow and I love the patterns it throws on the walls when the light is on.
Now, if I get around to buying cloth cord and the bits to make my own pendant light extension cords, I can make the cord longer and hang the light in the middle of the space. I will be doing that sooner or later so I can make the lights for the kitchen.
For now it’ll do.
z
Featured at:
Shared at:
steamer pendant light
Since the holes are only at the bottom of the steamer there are no pretty patterns on the wall around this light. It directs light downwards. Its not ideal for the pantry area, but it’ll do for now. It would be better over a table or a desk.
Obviously we use those low energy light globes everywhere.
I hate them.
They take ages to warm up to full strength and they’re ugly. But what can you do? You can get other styles in low energy globes now so when it comes time to replace them I’ll be looking for prettier alternatives.
Very rustic, huh?
The other light is prettier. Stay tuned.
z
cabinets are in – kitchen update
Yes! The cabinets are in. It feels like a huge step forward.
It is a huge step forward really. The cabinets are in place, the handles are on and its looking great.
For the drawers I picked antique style cup pulls like the ones on my old dressers. I bought them on ebay, from England. They were cheaper from there, even with postage.
Incredible.
On the cupboard doors I’m using these pumpkin style knobs I bought on ebay a long time ago. They’re actually cream, not white, and they match the new stove perfectly.
the first coat and sore knees – kitchen update
I have just spent the entire day shuffling along on my butt and knees sanding the kitchen floor.
Ok. Not the entire day but a bloody good portion of it.
I tore two #40 grit belts doing just one corner this morning, but they must have just been cheapies. I had to go into town to buy new ones and one of them lasted the rest of the floor. Mind you, they cost twice as much… After the #40 I went over it again with #120, then swept, vacuumed and wiped the dust off the floor before putting on the first coat of varnish cause the tin said ‘make sure floor is clean and free of dust’.
I don’t think this house will ever be free of dust. Ever again.
In fact, I think I’ll be finding dust in things for the next 5 years.
I am not looking forward to cleaning up, but unfortunately that’s what my life has become lately: Move things, clean, move things to somewhere else, clean again.
One day it will all be over. And it’ll be totally worth it!
As you can see, the floor has plenty of ‘character’. That’s what we DIY renovators like to call things which are old, stained, imperfect.
The square ‘patch’ is very visible. There were stains and mucky stuff under the old cabinets but I didn’t worry too much about them as they’ll be covered by the new cabinets. Unfortunately there were a couple of stains which will be visible… No amount of sanding would get rid of them. Probably sump oil or something equally inexplicable.
After all, this is the house where I found sump oil in the garden when I went to plant my hydrangeas.
I can deal with that. Its just more character.
Tomorrow Handyman is coming over to patch the holes he put in the wall when he did the plumbing, I’ll fill holes and hopefully do another coat.
At least that’s the plan.
z
the best laid plans – kitchen update
The day started off badly.
The car battery was flat cause someone, not naming names, but it starts with ‘W’ and ends in ‘ayne’, left the hazard lights on all night accidentally.
That was bummer #1.
Wayne put the car on the charger.
So we had to take Eduardo to work. That’s the old grey truck held together by rust spots, dints and black plastic where a back window should be (also thanks to someone, I won’t mention names, locking the keys in).
We were already in the city when I realized I’d left the work keys in the Beast (the newer, prettier, though only a little cleaner, truck).
That was bummer #2.
I realized I’d also left my wallet in the car.
That was bummer #3.
When I finished work I didn’t have my car, my audio book and comfy seat and I didn’t have money to go shopping.
That was bummer #4.
I called Wayne, told him he’d have to catch the bus cause I was going home to sand the floor. We could have dinner out when I picked him up from the bus stop. I booked at a local restaurant.
I made plans on the way… George said the kitchen cabinets are ready to put in this weekend (YAY!) so I needed to get the floor done. If I spent an hour on them tonight, then another hour on them tomorrow I should have most of the sanding done before Thursday.
On Thursday I have two dogs to groom in the morning, I could seal the floor, and even give it a second coat before picking up Wayne in the afternoon.
On Friday afternoon when Handyman arrived to patch all the holes in the plaster I could fill holes in the floor.
Then on Saturday or Sunday George would install the cabinets and I’d organise to have the plumbing and electrics connected after that.
I had such great plans… oh how naive I was…
I came home and the first thing I did was go start the car. I would let it run while I sanded.
The car wasn’t having any of that. It was still flat as a tack.
That was bummer #5.
I called roadside assist. I sanded till he arrived. About 15 minutes worth. He started the car up and recommended I take a long drive. I did. I drove for 40 minutes or so. There goes my sanding time.
That was bummer #6.
I got home, turned the car around, stopped outside the gate ready to go out for dinner, then thought “hmm, better test it” and …
drumroll…
It was still flat.
That was bummer #7.
I rolled it down the drive, threw it into second gear…
Nothing.
I rolled a bit further, tried again…
Nothing.
That was bummer #8.
I stopped just before the gate and called roadside assist again. “I need a new battery”.
The wait would be 45min or so. I called the restaurant and cancelled our reservation.
That was bummer #9.
So much for planning. I don’t know why I bother. I almost always get more done when I fly by the seat of my pants anyway!
The guy arrived to change the battery. $186 with the member discount, money I was not planning to spend on a battery.
That was bummer #10.
The restaurant hadn’t given away our table so we managed to have dinner after all.
The opposite of bummer:
z
up a ladder without a paddle – kitchen update
Ok, ok, I exaggerate. I started painting the fascia… However, it was high. I’ve always been the ladder girl when it comes to painting – I’d never use one of those extension sticks with a roller. No way. It gives me a crook neck. I use a ladder and put all the strain on my leg muscles.
They are the strongest muscles in the body for good reason. They have to lug me around all day!
So, when doing any painting I’m always the one who gets the job cutting in around the ceiling. And painting the ceiling by climbing up, rolling a bit, getting down, loading up the roller, moving over a tad, climbing up, rolling a bit, getting down… you get the picture.
Its my version of a step class.
Well, this last Sunday had me doing the extreme version of that sport. And cause the only place the ladder could rest was on the aforementioned fascia (the one I was painting), and since there were more steps involved, it was a lot more climbing and a lot less brushing.
I had planned* to have all the white bits on the front of the house railing done. I did all the posts, porch side and garden side, and the inside of the fascia… and then it got hot.
I may have mentioned that I don’t do well in the heat? No?
I’m stubborn. I said I’d do it, I’d planned to do it, so by golly gosh I was going to do it!
I lugged out the ladder (with some help from my brawny half), fought with it to get it level and steady, then gamely climbed up the 323 steps and started painting. I painted about a foot, climbed down, wrestled the ladder over a foot and repeated.
About halfway across the front of the house my calf muscles started to shake.
I would have pushed myself to finish, but the highest bits were yet to come, and … did I mention it was hot?
I was about to make the decision to quit for the day when the decision was made for me… I stepped back from the ladder and right into the bucket of paint.
I now have a few white patches of grass and one white boot.
My failure to finish aside, other things did get done.
The gasfitter came and installed the gas lines. Here’s a pretty photo of our gas connection. We opted to go with smaller gas bottles we own and can fill as needed rather than pay rent on larger ones. You may not notice, but the gasfitter fitted the lines on the unfinished part of the porch enclosure. Handyman was not pleased.
Speaking of Handyman, he did a great job on making a slab for the gas bottles to sit on. And Barney promptly immortalised himself in the fresh concrete.
This is what that area used to look like – the end of the porch was pretty (now enclosed), but the ground sloped down in that spot and there was a broken concrete path that lead into the wall, and gravel. A mess basically. Having the slab there gives us a level area not only for the gas bottles but for my collection of junk decorative garden art.
So, plumbing moved. Gas fitted. Electrics almost done (will they ever be finished? I’m not sure.) Pine lining started. Floor work started.
a quick shot of power tools
Hello circular saw! Hey there jigsaw! Nice to see you again grinder! I sure have missed you guys!
So, while I was there admiring them, patting them, etc, I remembered that I’d promised Wayne I’d put a lid on the box he stores chaff in for the horses. Its a raised garden bed box made of pallet wood that we got (in pieces) from the Men’s Shed in New Norfolk. That’s a community based place where men can go and bond over power tools, as well as learn new skills.
Anyway, Wayne had put this together, lining it better so it would hold the chaff, but he’d never put a lid on it. Up till recently we’d been using pieces of leftover flooring as a lid and moving them out of the way to reach in.
I’d been hit on the head by a falling ‘lid’ a few times…
It was time for a proper lid.
I’d gotten some pieces of laminate flooring from a friend and one piece was almost the right size. Using that and a piece of old timber I’d found, I created a proper lid. I attached the bit of timber to the end to give the lid something to hinge off, then trimmed the lid to the right size.
Since the flooring is that click together stuff, I had to reinforce it with bits of pine that came out of the kitchen. I glued and screwed those into the back to give the lid strength.
Then I used some gorgeous big old hinges I’d picked up from a tip shop. (I tell you, my tip shop finds always come in handy!).
The flooring and the timber slat were different thicknesses, so to make the hinges fit properly I had to pack it up a bit. For this I used some of the masonite we’ve been pulling off the kitchen floor.
Waste not, want not!
Lastly, I found an old handle among my collection of junk, and voila! A working lid. Not perfectly finished, but hay (pun intended!), the horses don’t mind.
No more head bashing cause now when you open it, the piece of timber on the end allows the lid to sit back against the wall with the right lean so it won’t slam back down.
z
its all happening – kitchen update
Yesterday was one heck of a busy day. And every busy day begins with a busy day before cause I had to remove everything that wasn’t nailed down from the kitchen.
That means I had to empty all cupboards and find a spot for the necessities (toaster, jug, coffee) and rudimentary food prep and cleaning. We now have a temporary kitchen area in the office and are washing up in the bathroom sink.
Handyman got here early in the morning and we removed the rest of the kitchen cabinets, then he started removing the flooring – vinyl and masonite.
I helped. I got down on the floor and started removing nails. Fun job.
We found that the bump on the floor is because there’s a rectangle of boards that was put in later or something. The joist along the wall in that area is about 1/2 inch lower than the rest, creating a wierd dip. The previous owners found it easier to trim the baseboards than to do the floor properly.
So my plan of sanding the floor this weekend goes out the window. I don’t think it’ll be smart to hire a sander for the weekend hoping that Handyman gets the floor issue sorted out on Saturday… Who knows what we’ll find when the floor comes up…
What did I say about this job growing with everything we start and can’t finish?
The electrician arrived to do a bit more wiring work. I somehow found the only electrician in Tasmania who believes in drip feeding his work. Seriously, he keeps calling to say he needs to come around and do something, does a small amount of work, then comes again a few days later to do a bit more.
Maybe he just likes my company!
Well, he’s a nice guy, neat, does a good job. And he likes country music. Anyone who likes Dwight Yoakam is a friend of mine. As long as it all comes together at the end I’ll be happy. He can’t finish the job till Aurora comes to move the electricity meter. Then he has to connect the stove and he’s done.
I had advertised the kitchen online and a guy came with a truck and a friend to pick it up. Thank goodness cause the porch was chockablock and I hadn’t been able to access my workshop area for weeks.
With all those cabinets gone, I was finally able to get to my power tools and I’m afraid that proved to be a temptation too hard to resist. I never finished pulling nails in the kitchen… I got distracted.
I’ll share my creations later. Meanwhile Wayne has been warned to stay out of the kitchen and I’m feeling better even though I have to make toast in my office and have aching hands.
Being creative makes my day.
z
guitars cadillacs hillbilly music
It didn’t rain on Sunday.
I’m glad I didn’t listen to the voice of laziness and watch tv all afternoon. After cleaning up the mess in the kitchen I got out a paint brush and tackled the porch rails.
I only did the front of the slats and the posts as far as I could reach without getting out a ladder. I figured squatting, bending and ducking behind lavender bushes was enough of a workout for one day.
Squint and imagine the rails painted the same pale grey as the house with white posts and top rail.
It’ll look good.
Of course there would’ve been more contrast if the colour I chose for the house was a bit darker like I thought it was…
Still…
Now all I have to do is undercoat the top of the posts, the inside of the rails, the fascia and do two topcoats on it all, and I’ll be done.
Sometime in 2017.
It was fun though, cause when I paint I listen to music and sing out loud. It helps me keep up the pace. I have proof the dogs love me unconditionally. They lay around my feet as I painted.
But the geese complained.
The music brought back memories… I listened to cds I hadn’t listened to for a while. Like BR549. Little Ramona… That song was dedicated to me by a country band I would go see. I was the punk girl who went hillbilly nuts.
http://www.youtube.com/watch?v=lK4Nmp6nJxQ
And Dwight, I love that nasally voice.
http://www.youtube.com/watch?v=4foq4HcQdpg
A favourite dancing tune by Warren Smith…
http://www.youtube.com/watch?v=JrHHO_FWABc
And of course, the Straight 8s, the best band in the world. Well, Australia anyway. I used to go watch, and dance, to these guys at least once a week. If they were playing in Melbourne, I was there or I was in traction somewhere.
http://www.youtube.com/watch?v=dV8jmIfPpkg
Did I ever mention I was a rockabilly gal? Did I ever mention I also line danced and did the two step? Or that before that I was a punk and a goth? Like little Ramona, I went from army boots and studded belts to ponytails and circle skirts to cowboy hats and boots.
Now I wear a cowboy hat in the garden and work boots to ride.
My how times have changed.
z


































